Brother RJ-4030 - Printer Reference Information; Printer Status Indicators

P-touch Template 2.0 Command Reference
- 43 -
7. Control Command Details
^CN Specify number of copies
ASCII: ^ C N n1 n2 n3
Decimal: 94 67 78 nd1 nd2 nd3
Hexadecimal: 5E 43 4E nh1 nh2 nh3
Parameters
0≤n1≤9
0≤n2≤9
0≤n3≤9
Description
z Specifies the number of copies to be printed.
(n1*100)+(n2*10)+n3: Number of copies (bytes) (1 to 999)
z The default number of copies is 1.
z This command is a dynamic command.
Remarks
z When printing is finished, the number of copies specified with this command returns to the number of
copies (static value) specified from the printer.
Example
z To change the number of copies to 100:
Since n1=1, n2=0 and n3=0, the command will be as follows.
^ C N 1 0 0
(5Eh 43h 4Eh 31h 30h 30h)