P-touch Template 2.0 Command Reference
- 49 -
7. Control Command Details
^OP Perform printer operation (feed)
ASCII: ^ O P n
Decimal: 94 79 80 nd
Hexadecimal: 5E 4F 50 nh
Parameters
1≤n≤2
Description
z Causes the printer to perform a feed operation.
n=1: Feeds 1 inch (for continuous length tape)
n=2: Feeds one label length (for die-cut labels)
Remarks
z Invalid if n is a value other than 1 or 2
Example
z To specify that the printer performs a feed operation:
^ O P 2
(5Eh 4Fh 50h 32h)
To Next Page
Loading...
