Brother RJ-4030 - ESC I a Select Command Mode

P-touch Template 2.0 Command Reference
- 57 -
7. Control Command Details
ESC i a Select command mode
ASCII: ESC i a n
Decimal: 27 105 97 nd
Hexadecimal: 1B 69 61 nh
Parameters
nh=00h 01h 03h 30h 31h 33h
Description
z Switches the mode.
nh=00h or 30h: ESC/P mode (default)
nh=01h or 31h: Raster mode
nh=03h or 33h: P-touch Template mode
z This command is a dynamic command.
Remarks
z If the specified value is one other than those that can be set, raster mode will be entered.