Brother RJ-4030 - ESC Ixi2 Select Command Mode

P-touch Template 2.0 Command Reference
- 63 -
7. Control Command Details
ESC iXi2 Select command mode
ASCII: ESC i X i 2 n1 n2 n3
Decimal: 27 105 88 105 50 nd1 nd2 nd3
Hexadecimal: 1B 69 58 69 32 nh1 nh2 nh3
Parameters
nh1: 01h (Fixed)
nh2: 00h (Fixed)
nh3: 00h 01h 03h
Description
z Switches the mode.
nh3=00h: ESC/P mode (default)
nh3=01h: Raster mode
nh3=03h: P-touch Template mode
z This command is a static command.
Remarks
z Invalid if a value other than those that can be set has been specified