Brother RJ-4030 - USB Printer Connection

Setting Up the Printer
21
1
e Click the [Drivers] tab, and then click
[Change Driver Settings]. If a User
Account Control message displayed,
type in the password, and then click
[Yes]. Choose [Brother RJ-XXXXX],
and then click [Remove...].
f Choose [Remove driver and driver
package], and then click [OK]. Follow
the on-screen instructions.
g Close the [Print Server Properties]
window.
The printer driver has been uninstalled.
Connecting the
Computer and Printer 1
The printer can be connected to your
computer via USB cable, Bluetooth (RJ-4030
only), Wi-Fi (RJ-4040 only) and the serial
cable.
Note
When connecting via Bluetooth, the
connection settings are saved even after
the printer is turned off.
USB Connection 1
a Make sure that the printer is turned off
before connecting the USB cable.
b Connect the printer end of the USB
cable to the USB port on the side of the
printer.
c Connect the other end of the USB cable
to the USB port on the computer.
Install the printer driver before
connecting the printer to the computer.