Brother SP-1 - Paper Is Jammed in the Back of the Machine (Jam Rear)

165
If the LCD displays [Jam Rear], follow these steps:
1. Unplug the machine from the AC power outlet.
2. Pull Tray #1 (1) completely out of the machine as shown by the arrow.
3. Lift the paper support (1), and then pull it at an angle completely out of the machine as shown by the arrow.
4. Squeeze both levers (1), and then open the Jam Clear Cover at the back of the machine.
5. Slowly pull the jammed paper out of the machine.
Paper is Jammed in the Back of the Machine (Jam Rear)
Depending on the paper size, it is easier to remove the jammed paper from the front of the machine rather
than from the back of the machine.
1
1
1