Brother SP-1 - Configure Certificates for Device Security

82
The Network Configuration Report lists the network configuration, including the network print server settings.
1. Press [Settings] > [All Settings] > [Print Reports] > [Network Configuration] > [Yes].
The machine prints the current Network Configuration Report.
Print the Network Configuration Report
• Node Name: The Node Name appears on the current Network Configuration Report. The default Node
Name is "BRN123456abcdef" for a wired network or "BRW123456abcdef" for a wireless network (where
"123456abcdef" is your machine's MAC Address / Ethernet Address.)
• If the IP Address on the Network Configuration Report shows 0.0.0.0, wait for one minute and try printing
it again.
• You can find your machine's settings, such as the IP address, subnet mask, node name, and MAC
Address on the report, for example:
- IP address: 192.168.0.5
- Subnet mask: 255.255.255.0
- Node name: BRN000ca0000499
- MAC Address: 00-0c-a0-00-04-99
Related Information
Related Information
• Network Features
Related Topics:
• If You Are Having Difficulty with Your Machine's Network
• Configure IEEE 802.1x Authentication for a Wired or a Wireless Network Using Web Based Management
(Web Browser)
• Error and Maintenance Messages