Brother SP-1 - Reset the Network Settings to Factory Default

83
You can use your machine's control panel to reset the print server to its default factory settings. This resets all
information, such as the password and IP address.
1. Press [Settings] > [All Settings] > [Network] > [Network Reset].
2. The reset confirmation message is displayed. Press [OK] for two seconds.
The machine will restart.
Reset the Network Settings to Factory Default
• This feature restores all wired (supported models only) and wireless network settings to the factory
settings.
• You can also reset the print server to its factory settings using Web Based Management.
Related Information
Related Information
• Network Features