III - 52
<Error log>
Error information (error code and total pages printed at the time of the error) are logged in the
event of following errors.
The latest error information is printed after “#01=”.
The previous error is printed after “#02=”. Error information log can be stored up to 10 errors.
The oldest error information will be removed when the new error information is added.
Error message of the latest error number is displayed after “Last=#01”.
(Example (TD-2130N): Check Media)
(4) Confirm that the tape is fed properly, printing is correct, and the tape is cut accurately.
If any fault is found, excite the troubleshooting referring to “CHAPTER IV
TROUBLESHOOTING AND ERROR MESSAGE”.
(5) Pull up the release lever and confirm that the roll cover is opened and closed properly.
(6) Confirm that the Feed button works properly.
(7) Confirm that the Power button works properly.
(8) You can also check the following printer setting information;
Program Version
Printer Usage History
Paper Information
Printer Setting Information
List of Transferred Data
Network Setting Information
Error code Error message Description
00 No Error No error (Default)
01 Check Media Field error
02 Check Media Tape end error
03 Communication Error Connection error
04 Memory Full Memory full error
05 Close Cover Open cover error
07 Database Record Problem Database search error
08 No Template Selected No template error
09 Setting Wireless LAN Unsuccessful WiFi error
0C Noncompliant USB Device USB host error
0D Charging Error Battery error
0E Recharge Battery Recharge error
0F Mass Storage Operation Error Mass storage error
10 System Error 01 System error 01
11 System Error 02 System error 02
To Next Page
Loading...
