Brother TD-2020 - Wired Lan;Wireless LAN Tabs

Printer Setting Tool
31
3
Wired LAN/Wireless LAN
Tabs 3
TCP/IP (Wired) 3
TCP/IP (Wireless) 3
1 Boot Method
Select [STATIC], [AUTO], [BOOTP], [DHCP]
or [RARP].
2 IP Address/Subnet Mask/Gateway
Specify the various values.
You can only enter settings when the IP
address is set to [STATIC].
3 DNS Server Method
Select [STATIC] or [AUTO].
4 Primary DNS Server IP Address/Secondary
DNS Server IP Address
You can only enter settings when the DNS
server is set to [STATIC].
Wireless Settings 3
1 Communication Mode
Select [Ad-hoc] or [Infrastructure].
2 SSID (Network Name)
Click the [Search] button to display the SSID
selections in a separate dialog box.
3 Channel
Select from the displayed options.
4 Authentication Method/Encryption Mode
The supported encryption modes for the
various authentication methods are as shown
in Communication Modes and Authentication
Methods/Encryption Modes on page 32.
5 WEP Key
You can only specify a setting when WEP is
selected as the encryption mode.
6 Passphrase
You can only specify a setting when WPA-
PSK, WPA2-PSK, or WPA-PSK/WPA2-PSK is
selected as the authentication method.
1
2
3
4
1
2
3
4
1
2
5
6
8
3
4
7