Need help?Do you have a question about the Browan TBMS100-915 and is the answer not in the manual?
General| Frequency | 915 MHz |
|---|---|
| Power Supply | Battery |
| Operating Temperature | -20°C to 60°C |
| Operating Humidity | 0% to 95% (Non-condensing) |
| LoRaWAN Version | 1.0.3 |
| Product Type | Motion Sensor |
| Communication Protocol | LoRaWAN |
| Sensor Type | PIR |
| Detection Range | Up to 12 meters |
| Field of View | 110° |
| Certification | CE, FCC |
Details the physical dimensions and weight of the motion sensor.
Information on the Passive Infrared detectors and Fresnel Lens.
Operating temperature range and IP rating of the device.
Specifies frequency bands, transmit power, and receiver sensitivity.
Lists FCC, IC, CE, and ROHS REACH compliance standards.
Details the battery type, voltage, and current consumption.
Describes the single blue LED indicator on the device.
Mentions PCB temperature monitoring and battery monitoring.
Instructions for removing the battery insulating pull tab before use.
Describes initial status message sending and periodic updates.
Details the conditions that trigger a status message transmission.
Specifies LoRaWAN port, payload length, and data fields for status messages.
Instructions on how to replace the battery, specifying the type.
Safety warnings regarding battery disposal, explosion risks, and replacement.
Details the information present on the round label, including QR code.
Explains the structure and length of the QR code data.
Specifies JoinEUI formats for different regions and its length.
Specifies DevEUI format and its hexadecimal representation length.
Explains the model number format and region-specific variations.
Details the checksum for factory production.
Explains the fixed model name and its exclusion from QR code.
Defines the GS1 DataMatrix and its application identifiers for labels.
Warnings about magnets, small parts, and battery handling dangers.
Instructions on avoiding physical damage, foreign objects, and heat sources.
Warnings about heat exposure, dismantling, short-circuiting, and mechanical shock.
Guidelines on correct battery use, mixing cells, storage, and cleaning.
Advice on temperature exposure, hub setup, and wet hand usage.
Notice regarding chemicals known to cause cancer or birth defects.
Instructions for cleaning the device using a dry cloth.
Cautions on battery disposal, explosion risk, and correct replacement.
Statement of compliance with EU Directive 2014/53/EU.
Compliance with FCC Rules Part 15 and Industry Canada RSS Standards.
Instructions for proper product disposal and recycling.
Details the payload structure for PIR sensor configuration settings.
Defines parameters for band-pass filter, window time, pulse counter, and detection threshold.
Describes the payload structure for sensor settings configuration.
Details commands for reporting interval, occupied interval, and detection time.
Provides examples of command content for various sensor settings.
Details the response content format for confirmed and unconfirmed downlinks.
To Next Page
