Global General Information
Global User Manuall
1-5
General Info
Machine Safety
Operating any system in a safe manner is a full time job. Always
concentrate on the job you are working on and stay focused.
Distractions can prove to be dangerous to you, the people
working around you or the machine. Read and understand the
safety list below before proceeding any further in this manual.
Inspect the machine daily to verify that all guards are in place.
Never operate the machine with any safety guards removed.
General Safety
√ Always wear safety glasses when operating this machine.
Additionally, wear any relative safety equipment as dictated
by the working environment.
√ A 2” bright yellow caution stripe should be painted 16”
outside the machine area. When the machine is active, stay
outside of this safety zone.
√ Do not attempt to operate the machine until you have read
the Site Preparation and User’s Operation Manual.
√ Do not attempt to run the machine until you are completely
certain that you understand how to turn the machine off in an
emergency.
√ Do not remove or tamper with any Warning notices on the
machine.
√ Do not bypass or disconnect any safety devices.
√ Use the granite surface as a measuring area only.
To Next Page
Loading...