Adjust cutting height.
Warning! Be certain that tractor engine is stopped, key is removed, and all rota-
tion of the cutter has ceased before making adjustments.
Caution! Avoid very low cutting heights. Striking the ground with blades causes a
damaging shock that can damage both the cutter and the tractor.
Using the tailwheel adjustment, Item A below, and the tractor’s lift arms, set the cutter
to the desired height; the cutter is designed to operate with a cutting height range between
2” and 12”. Note that, on level ground, the front of the cutter should be 1” below the rear .
Set the tractor’s lift stop at the required position to maintain a uniform cut.
Front
1 inch above front
22
A. Tailwheel Adjustments
To Next Page
Loading...
