Equipment Safety
Safety Decals
The following safety decals should be attached to the equipment at all times. Should any decals
become damaged or lost, it is the responsibility of the owner to replace it. Additional decals may be
obtained from the dealer or Brown Manufacturing Corporation at no charge.
Part No.: SD-010.
9
ADVERTENCIA
ADVERTISSEMENT
WARNING
Antes de probar la unidad por primera vez deben
remitirse a las instrucciones contenidas en el manual.
S’assurer de bien comrendre toutes les
consignes du manuel de propriétarie avant
d’utiliser la unité.
Read and understand
owner’s manual before
operating unit.
Part No.: SD-001A.
THROWN OBJECT HAZARD
To prevent serious injury or death from
thrown objects:
•Stay clear when blade is turning.
•Operate only with all guards
installed and in good condition.
•Stop operation if bystanders
come within several hundred feet.
WARNING
T
o prevent serious injury
or death:
•Operate only at 540 RPM PTO.
•Keep guards and shields
in place.
SD-008A, Standard models*
WARNING
To prevent serious injury
or death:
•Operate only at 1000 RPM
PTO.
•Keep guards and shields
SD-007A, Standard models*
DANGER
To Next Page
Loading...
