To Next PageTo Next Page
Need help?Do you have a question about the BRP can-am COMMANDER 2017 Series and is the answer not in the manual?
General| Brand | BRP |
|---|---|
| Model | can-am COMMANDER 2017 Series |
| Category | Offroad Vehicle |
| Language | English |
Essential pre-ride safety and vehicle familiarization steps.
Explains how safety messages are presented and used in the guide.
Provides details on the guide's purpose, content, and language availability.
Deadly gas in exhaust. Avoid enclosed areas. Seek fresh air if symptoms occur.
Gasoline is flammable. Use approved containers. Avoid sparks and flames.
Certain components get hot during operation. Avoid contact to prevent burns.
Do not make unauthorized modifications; they may increase risk of crash or injury.
Details owner and operator duties, qualifications, and safe riding practices.
A detailed checklist for ensuring vehicle safety and readiness before each ride.
Guidance on proper riding gear and vehicle preparation for safe operation.
Key strategies and warnings to prevent rollovers, collisions, and loss of control.
Essential techniques for safe vehicle control across various terrains and conditions.
Instructions for safely managing cargo, loads, and towing operations.
Identifies and explains crucial safety labels found on the vehicle itself.
Explains how to locate and identify vehicle and engine serial numbers for warranty and tracing.
Provides detailed technical data for engine, lubrication, cooling, transmission, and chassis.
Explains the function and proper grip of the steering wheel for directional control.
Describes the brake pedal's location and function for slowing down or stopping the vehicle.
Details the accelerator pedal's function in controlling engine speed and vehicle acceleration.
Explains the shift lever's location and use for changing gearbox positions (P, R, N, H, L).
Information on the ignition switch positions and the different types of operating keys.
Explains the function and operation of the engine start button.
Details the operation of the lever for headlights, horn, and turn signals.
Explains how to select between 2-wheel and 4-wheel drive modes for optimal traction.
Information on selecting between Sport and ECO modes for different riding characteristics.
Explains the functions of the override switch, including engine speed limiter bypass.
Details how to change Dynamic Power Steering (DPS) modes for varying levels of assist.
Instructions on how to lock the shift lever for security when the vehicle is parked.
Overview of the LCD gauge components and their functions.
Explains the different display modes available, such as Speed, RPM, and Combined.
Details important messages displayed on the gauge and their implications for vehicle operation.
Instructions for setting the clock and selecting units (km/h vs MPH) on the gauge.
Describes the analog and digital gauges, indicator lamps, and displays.
Explains the meaning of various indicator lamps for vehicle status and warnings.
Instructions for setting clock, units, and language on the analog/digital gauge.
Instructions on adjusting the steering wheel height for optimal comfort and control.
Details the purpose of side nets in keeping limbs inside the cockpit and preventing injury.
Instructions on proper seat belt use, adjustment, and the consequences of not fastening them.
Details the cargo box features, capacity, and safe loading practices.
Information on the vehicle's standard hitch support and its usage.
Guidance on adjusting suspension for handling and comfort based on load and conditions.
Explanation of the Dynamic Power Steering system and how to select its modes.
Specifies recommended fuel types, octane ratings, and warnings about alcohol content.
Step-by-step instructions for safely fueling the vehicle, including all safety warnings.
Instructions for safely starting the vehicle's engine, including brake and shift lever requirements.
Explains when to use low range to prevent excessive drive belt slip and damage.
Procedures for safely stopping the engine and parking the vehicle, including on slopes.
Steps to take if water enters the CVT, including draining procedures.
Instructions to have the vehicle transported to a dealer if it has rolled over; never start the engine.
Guidance to transport the vehicle to a dealer if it has been submerged; avoid starting the engine.
Steps for safely lifting the front of the vehicle and supporting it with jack stands.
Steps for safely lifting the rear of the vehicle and supporting it with jack stands.
Instructions for inspecting, cleaning, and replacing the engine air filter.
Procedures for checking, changing, and replacing engine oil and filter.
Procedures for checking brake fluid levels, inspecting the brake system, and pad wear.
Instructions for cleaning and proper use of seat belts, emphasizing safety.
Explains how to locate and identify vehicle and engine serial numbers for warranty and tracing.
Provides detailed technical data for engine, lubrication, cooling, transmission, and chassis.
Lists common issues and their potential causes and solutions for the vehicle.
Explains various messages displayed on the gauge and their implications for vehicle operation.
Outlines the terms, conditions, scope, and limitations of the vehicle's limited warranty.
Details the warranty terms specific to the European Economic Area and surrounding regions.
Informs users about how their personal data is used for safety, warranty, and marketing purposes.
Provides contact addresses and information for BRP customer support across various regions.
Instructions for owners to notify BRP of address changes or ownership transfers.
