149
POWERHEAD
CRANKSHAFT, PISTONS AND CAMSHAFT
7
CRANKSHAFT, PISTONS
AND CAMSHAFT
Disassembly
Remove the powerhead. Refer to REMOVAL
AND INSTALLATION on p. 130.
Remove the cylinder head assemblies. Refer to
cylinder head Removal on p. 136.
Remove the idle gear and camshaft.
Remove the four tappets.
Remove connecting rod screws and caps.
Push piston and connecting rod out through the
top of cylinder bore.
IMPORTANT: Mark cylinder number on all con-
necting rods and pistons for proper reassembly.
1. Camshaft 005697
1. Tappets 005698
1
1
005699
005700
To Next Page
Loading...
