178
MIDSECTION
DRIVESHAFT HOUSING AND OIL PAN
Remove the two lower mount cover screws and
remove both lower mount covers.
Remove port and starboard lower mount nuts and
lower mount screws.
Remove washer, lower side cushion, lower side
mounts, lower mount, and lower thrust mount.
Remove two upper mount nuts and driveshaft
housing (with oil pan).
Remove upper mount screws and washers.
1. Cover screw
2. Mount cover
005777
005778
1. Washer
2. Lower side cushion
3. Lower side mount
4. Lower mount
5. Lower thrust mount
005779
WARNING
When removing the upper mount nuts,
driveshaft housing must be firmly sup-
ported.
1. Upper mount nut 005780
005781
To Next Page
Loading...
