192
MIDSECTION
STERN BRACKET
Apply Triple-Guard grease to steering bracket
shaft and install in swivel bracket.
Install steering friction adjuster plate to steering
bracket (tiller models).
Install washer and shim, then insert key into
groove on steering bracket shaft.
Align key with channel in lower mount bracket and
install bracket. Install circlip to retain bracket.
After completing stern bracket assembly, apply
Triple-Guard grease at each grease fitting.
1. Steering bracket shaft assembly 005845
005846
1. Washer
2. Shim
3. Key
005847
1
1. Lower mount bracket
2. Circlip
005848
005849
005850
1
To Next Page
Loading...
