102
Press to start engine. Refer to
Engine Starting Procedure
in
basic
procedures
.
Once engine is started, press to engage the electronic reverse. Refer
to
Shifting in Reverse
in
basic procedures
for procedure.
HHeeaaddlliigghhttss DDiimmmmeerr SSwwiittcchh
Press to select HI or LOW beam. Lights are automatically ON when
the engine is running.
HHeeaatteedd GGrriippss SSwwiittcchh
NNOOTTEE::
Under 2000 RPM, heated grips will be limited at 50%.
Depress switch as required to select heating intensity to keep your
hands at a comfortable temperature.
VVAARRIIAABBLLEE IINNTTEENNSSIITTYY
1. Heated grip switch
2. Increase heat
3. Decrease heat
The heating intensity is displayed via the digital display.
SECONDARY CONTROLS
To Next Page
Loading...
