159
SSeettttiinnggss
SSeettuupp
1. Upper button (S)
2. Lower button (M)
Using LOWER button, select SSEETTTTIINNGGSS and hold to enter setting
menu.
RReesseett SSttaattss
Using LOWER button, select RREESSEETT SSTTAATT and hold to reset.
UUnniitt SSeelleeccttiioonn
This multifunction gauge is factory preset in Imperial units but it is pos-
sible to change it to Metric units.
Using LOWER button, select UUNNIITTSS and hold button to change units.
SSeettttiinngg CClloocckk
Using LOWER button, select CCLLOOCCKK to change the clock.
1. Press LOWER button to select clock display.
2. Push and hold LOWER button for 1 second.
3. Press LOWER button to select 12:00 AM PM or 24:00 time base.
4. Push and hold LOWER button to acknowledge selection.
5. Press LOWER button to change hours (hours flash).
6. Push and hold LOWER button to acknowledge hour selection.
7. Press LOWER button to switch to minutes (minutes flash).
8. Push and hold LOWER button to acknowledge minutes selection.
4.5” DIGITAL DISPLAY
To Next Page