BRP Lynx E-TEC Series - Page 172

170
SSeettttiinnggss
SSeettuupp
Using MENU button, select SSEETTTTIINNGGSS and hold to enter setting
menu. Various options are available such as swapping the SPEED
and RPM in the Central Display.
UUnniitt SSeelleeccttiioonn
This multifunction gauge is factory preset in Imperial units but it is pos-
sible to change it to Metric units.
Using MENU button, select UUNNIITTSS and hold button to change units.
SSeettttiinngg CClloocckk
Using MENU button, select CCLLOOCCKK and hold to change units.
1. Press MENU button to select clock display.
2. Push and hold MENU button for 1 second.
3. Press MENU button to select 12:00 AM PM or 24:00 time base.
4. Push and hold MENU button or OK button to acknowledge
selection.
5. Press MENU button to change hours (hours flash).
6. Push and hold MENU button or OK button to acknowledge hour
selection
7. Push MENU button to switch to minutes (minutes flash).
8. Press MENU button to change minutes.
SSeettttiinngg LLaanngguuaaggee
The gauge display language can be changed. Refer to an authorized
BRP snowmobile dealer for language availability and to setup the
gauge to your preference.
7.2” DIGITAL DISPLAY