RO
TAX 125 MAX evo, Junior MAX evo, Mini MAX evo, Micro MAX evo
Pa
ge 11/58
Ed
ition 09/2016
Æ Ro
ute the carburetor Bowden cable on the top side of the chassis tubes and attach
with the tie wraps supplied. Make sure that the Bowden cable does not touch any
moving parts or the track.
p Warning: The carburetor Bowden cable must not be kinked or restricted as the
carburetor piston might get stuck in full throttle position.
Æ Set and secure the adjustment screw for Bowden cable on chassis such that the
carburetor piston will remain in closed position when throttle pedal is not activated.
Æ Set and secure the stop screw for throttle pedals such that, with pedal completely
pressed down, the carburetor piston will be in fully open position. The Bowden cable
must not be under full tension when the throttle is in fully open position.
To Next Page
Loading...
