BRP Rotax 125 MAX evo - Fitting of the Spark Plug

RO
TAX 125 MAX evo, Junior MAX evo, Mini MAX evo, Micro MAX evo
Pa
ge 15/58
Ed
ition 09/2016
Fi
g. 15
7. Fi
tting of the spark plug
See Fig. 16.
The engine will be supplied with a spark plug of the type NGK Iridium.
Æ Remove the transport plug from the cylinder head.
Æ Check electrode gap of spark plug. Adjust as required.
¿ Note: The electrode gap of the spark plug should be 0,7 mm (0.027 in) to 0,8 mm wide
(0.032 in) (for NGK spark plugs). Only slight bending of the ground electrode is
permitted.
Æ Fit supplied spark plug (pos. 1) and tighten 25 Nm (221 lbf in) to 27 Nm (239 lbf in).
Æ Install the spark plug connector (pos. 2), ensure correct engagement.
¿ Note: The engine type 125 Micro MAX evo has a special spark plug. It has been designed
for this engine exclusively. For more details, have a look at the spare parts manual.
Fig. 16