BRP Rotax 125 MAX evo - Check of Oil Level in Gear Box

ROT
AX 125 MAX evo, Junior MAX evo, Mini MAX evo, Micro MAX evo
Pag
e 19/58
Edi
tion 09/2016
9. Che
ck oil level in gear box
The gear box is already filled with the appropriate amount of oil 100 cc (0.026 gal) by the engine
manufacturer. However, before the engine is installed in the frame, the oil level must be checked or
replenished. See Fig. 38.
Æ Place engine on a horizontal surface and/or assembling trestle.
¿ Note: To measure the oil level exactly, drain the gear oil and determine it using a
measuring cup.
Æ Loosen Allen screw (pos. 1) with gasket ring (pos. 2) and absorb the leaking oil in a
measuring cup. If necessary, remove the air vent screw (pos. 3) to ensure a better
oil drain.
Æ Determine the gear oil using the measuring cup.
¿ Note: Oil capacity at new filling is 100 cc (0.026 gal).
¿ Note: Specification of gear oil: engine oil SAE 15W-40.
Æ Tighten the Allen screw (pos. 1) with new gasket ring (pos. 2). Tightening torque
10 Nm.
Æ Replenish new gear oil in the air vent hole.
Æ Hand-tighten the air vent screw (pos. 3).
Fig. 38