BRP Rotax 125 MAX evo - Engine Tuning and Calibration; Performance Graphs Overview; Carburetor Calibration Procedure; Warranty Disclaimer for Calibration

Ope
rator’s Manual ROTAX 125 MAX evo, Junior MAX evo, Mini MAX evo, Micro MAX evo
Pag
e 40/58
Edi
tion 09/2016
4. Eng
ine tuning
Performance graphs
In this diagram, the different performance characteristics of the MAX engines are shown. The
vertical Y-axis shows the power in kilowatts (kW). The horizontal X-axis shows the rotational speed
in revolutions per minute (rpm).
For more information, please check the performance data sheets on www.rotax-kart.com.
K00414
4.1. Carburetor calibration
The standard carburetor calibration is set for an ambient temperature of 25 °C / 77 °F and 400 m /
1310 ft above sea level. For an operation at different temperatures and altitudes, the main jet of the
carburetor has to be changed to optimize engine performance.
¿ Note: For an engine operation at an ambient temperature below 10 °C / 50 °F, make sure
not to demand full power before the coolant temperature has reached 45 °C / 113
°F.
¿ Note: The warranty granted by BRP-Rotax will no longer apply, if the carburetor calibration
is carried out improperly and therefore causes engine damage.