RO
TAX 125 MAX evo, Junior MAX evo, Mini MAX evo, Micro MAX evo
Pa
ge 8/58
Ed
ition 09/2016
¢ At
tention: Fuel hose can be damaged! Avoid excessive widening of the fuel hose.
Fig. 4
2.
1.1. Concerns all engines except 125 MAX evo
For engines without exhaust slide, a direct connection (with vacuum hose) between the
gearbox and the fuel pump must be installed, see Fig. 5
Æ Therefore, cut a 400 mm (15.75 in.) long piece of fuel hose.
¿ Note: For engines with exhaust slide, see chap. 8.
Æ Secure the vacuum line (pos. 2, Fig. 5) on the gearbox housing to prevent
disengagement using a tie wrap (pos. 1).
Fig. 5
Æ In
stall the connection between the fuel tank and the fuel filter. The length of this line
may vary from chassis to chassis.
¢ Attention: Route the fuel line from the fuel tank to the fuel pump so that it does not touch any
moving parts or the track and attach the fuel line onto the top side of the chassis
tube.
¢ Attention: The flow in the impulse hose and fuel lines must not be restricted by the use of tie
wraps.
¢ Attention: The use of an extra fuel filter must not cause further flow resistance in the fuel line
between the fuel tank and the fuel pump.