BRP ROTAX 912 Series - Page 108

BRP-Rotax
MAINTENANCE MANUAL LINE
Engine test run Engine test run is necessary:
Step
Procedure
1
Operate the engine until the temperatures have stabilized for a period of 5
min. (engine oil temperature between 50 to 70 °C (122 - 160 °F).
2
Switch the engine OFF.
3 Allow the engine to cool down.
4
Check for leaks.
5
Check the coolant level and top up with coolant as required.
12–10–00
Page 6
January 01 2020
Effectivity: 912 Series
Rev. 0