BRP ROTAX 912 Series - Page 127

BRP-Rotax
MAINTENANCE MANUAL LINE
Belt tension To adjust the belt tension:
Step
Procedure
1
Loosen the hex. screw (1) M10 and the two M8 allen screw (2) and (3).
2 Press the alternator upwards and tighten allen screw (3).
3
Then tighten hex. screw (1) M10 with tightening torque 40 Nm (30 ft.lb) and
allen screw M8 (2) with tightening torque 22 Nm (16 ft.lb).
Effectivity: 912 Series
Rev. 0
12–20–00
Page 15
January 01 2020