BRP Sea-Doo GTX WAKE 215 2008 User Manual

Date: January 11, 2008 Subject: Predelivery Inspection (4-TEC™)
(Canada / U.S. / Other country)
No. 2008-1
REVISION 1, May 7, 2008 <=
2008
MODEL PACKAGE
MODEL
NUMBER
ENGINE (hp)
PREDE L IVERY
KIT P/N
SERIAL
NUMBER
STD
148A 294 000 824
STD inter.
148B
1503NA
(155)
294 000 821
STD
338A 294 000 824
STD inter.
338B
1503BVIC
(215)
294 000 821
WAKE 158A 294 000 824
WAKE inter. 158B
1503NA
(155)
294 000 821
WAKE 268A 294 000 824
WAKE inter. 268B
1503BVIC
(215)
294 000 821
LTD 188A 294 000 825
GTX
†
LTD inter. 188B
1503BVIC
(215)
294 000 820
STD 178A / 178C
294 000 824
STD inter.
178B / 178D
1503BVIC
(215)
294 000 822
X 318A 294 000 827
RXT™
X inter. 318B
1503BVIC H O
(255)
294 000 828
STD
238A 294 000 824
STD inter.
238B
1503DT
(130)
294 000 819
SE
248A 294 000 824
SE inter.
248B
1503DT
(130)
294 000 817
SE 308A / 308C
294 000 824
SE inter.
308B / 308D
1503NA
(155)
294 000 817
STD R
258A 294 000 826
GTI™
STD R inter.
258B
1503DT
(130)
294 000 818
STD
288A 294 000 824
STD inter.
288B
1503NA
(155)
294 000 823
STD
218A 294 000 824
STD inter.
218B
1503BVIC
(215
)
294 000 823
X 328A 294 000 827
RXP™
X inter. 328B
1503BVIC H O
(25
5)
294 000 829
ALL
GTX
†
is a trademark of Castrol Ltd. Used under license
DUn
derlined text(s) between arrows is (are) added element(s) to the original publication.A
Printed in Canada. (sbl2008-002 JPM) 1/29
©2008 Bombardier Recreational Products Inc. and BRP US Inc. All rights reserved.
®™ and the BRP logo are trademarks of Bombardier Recreational Products Inc. or its affiliates.

BRP Sea-Doo GTX WAKE 215 2008 Specifications

General

Brand	BRP
Model	Sea-Doo GTX WAKE 215 2008
Category	Boat
Language	English

Summary

Important Notice

Preliminary Information and Warnings

Important preliminary information and warnings regarding the predelivery process.

Uncrating Procedures

Crate Cover and Lifting

Remove crate cover and lift watercraft from shipping crate.

Shipping Bracket and Protector

Remove engine foam protector and shipping bracket.

Set-Up Procedures

Battery Activation and Installation

Procedures for preparing, installing, and charging a new battery.

Handlebar and Controls Assembly

Install handlebar covers, mirrors, and related components.

Steering Assembly and Cable Routing

Mount steering assembly, route cables, and install components.

Storage Cover Installation

Remove plastic wrapping and access cover for storage.

Final Preparation Steps

Steering Alignment

Position handlebar and measure distance to floorboard for alignment.

Fuel System Procedures

Fuel tank filling, pressurization, and safety warnings.

Key Programming and Settings

Program keys and configure cluster language/scale settings.

Engine Oil and Throttle Cable

Check engine oil level and adjust throttle cable.

Final Inspection and Delivery

General Inspection and Cleaning

Perform general inspection, remove decal films, and clean watercraft.

Accessories and Delivery

Install accessories, provide demo ride, and complete delivery paperwork.

Break-In Period Explanation

Explain the 10-hour break-in period and associated precautions.