146
TTYYPPIICCAALL
The engine cut-off switch (tether cord) is located on the console.
The tether cord cap must be securely snapped on the engine cut-off
switch to allow vehicle operation.
Pulling the tether cord cap from the switch shuts the engine off.
WWAARRNNIINNGG
AAllwwaayyss aattttaacchh tthhee tteetthheerr ccoorrdd eeyyeelleett ttoo ccllootthhiinngg bbeeffoorree ssttaarrttiinngg
tthhee eennggiinnee..
DD..EE..SS..SS.. ((DDiiggiittaallllyy EEnnccooddeedd SSeeccuurriittyy SSyysstteemm))
The tether cord cap has an integrated D.E.S.S. key to provide you and
your snowmobile with the equivalent security of a conventional lock
key.
The D.E.S.S. key contains an electronic chip which features a unique
permanently memorized digital code.
Your authorized BRP snowmobile dealer has programed the D.E.S.S.
of your snowmobile to recognize the D.E. S.S. key in the tether cord
cap to allow vehicle operation.
If another tether cord is used without programming the D.E.S.S., the
engine will start but will not reach drive pulley engagement speed to
move vehicle.
Make sure the tether cord cap is free of dirt or snow.
PRIMARY CONTROLS
To Next Page
Loading...
