Need help?Do you have a question about the Brüel & Kjær Vibro VIBROTEST 60 and is the answer not in the manual?
General| Battery Life | Up to 8 hours |
|---|---|
| Input Voltage Range | ±10 V |
| ADC Resolution | 24-bit |
| Interface | USB, Ethernet |
| Measurement Channels | 2 channels |
| Display | Color display |
| Data Storage | Internal memory, USB |
| Power Source | Rechargeable battery or external power |
| Operating Temperature | -10°C to +50°C |
| Storage Temperature | -20°C to +70°C |
| Vibration Measurement Standards | ISO 10816, ISO 7919 |
Explains the basic operation, buttons, and display of the VIBROTEST 60.
Describes the operational procedures and features within Analyser mode.
Explains the functionality and steps for Data-collector mode operation.
Outlines the procedures and capabilities for Field Balancing mode.
Setup and configuration options for vibration measurement parameters.
How to acquire and display Overall Vibration and BCU measurements.
Procedures for acquiring and displaying Spectrum and Cepstrum data.
Steps for acquiring and displaying Envelope Analysis / BCS measurements.
Steps for acquiring measurement data at selected points.
General principles and overview of field balancing procedures.
Steps for setting up and executing the balancing procedure.
Detailed example of single-plane balancing with polar correction.
Example of performing repeat balancing for single-plane correction.
Example of two-plane balancing using component correction.
Balancing example with prognosis and polar correction.
To Next Page