120 h/Units:
2.1.5.
Display
2.2. REAR PANEL
TRANSDUCERS:
Used
to
select a 120-hour recording period. When selected, measure-
ments are made every
two
hours.
In
either the "Display"
or
"Replay/Plot" modes this pushkey can be used
to
change the dis-
played data measurement units from
Sl
to
Imperial
or
vice versa.
----------------------------------------------
··
-···
-·
--
-·-·
--
-~·
--
-·
_
..
-
+ 1 2 3
Lt
~
.:;
{
~:
~
tO
!
"""~~-
--
--------~
-~
Fig. 2.5. Display
of
the
Indoor
Climate
Analyzer
Type 1213
Twenty-character alphanumeric Display displays measurement data in real-time. It can
also be used
for
replaying data stored in the Analyzer Memory. Temperature (°C) mea-
surements are displayed
to
one decimal place; velocity measurements
to
two decimal
places (for metric units); degrees Farenheit
to
the nearest integer. All measurements are
clearly annotated. Information
for
using the instrument is also displayed.
Fig. 2.6. Rear Panel
of
Indoor
Climate
Analyzer
Type 1213
Five input sockets
for
connection
of
Transducers to the Type 1213.
The sockets are different (except
for
the MM 0034 and MM 0035) to
ensure the Transducers are properly connected.
Air Temp. MM0034:
4-pin socket
for
connection
of
the
Air
Temperature Transducer
MM
0034. A MM 0035 Surface Temperature Transducer can be con-
nected
to
this socket in place
of
the
Air
Temperature Transducer.
13
To Next Page
Loading...
