BB106411.book : 2237-ch3 Black 13
Chapter 3 – Taking Measurements
Making Measurement Settings
BB1064–11
3–13
2237 Controller
User Manual
Regardless of the parameters that are displayed, the following
parameters are always saved when you store a record:
● L
eq
● MaxP
● MaxL
● MinL
● Time and frequency weightings
● Time and date or measurement
● Measurement duration
● Overload status
For more information about records, see section 4.1.
For a complete listing of the available parameter combina-
tions, see the section 7.3.
3.4 Making Measurement Settings
Before you begin measuring, your sound level meter must be
set up correctly. Settings that affect measurements and
records are:
● Measurement Range
● Time Weighting
● Preset Time
● Date and Time
● Calibration (see section 3.1)
This section explains how to make each of the above settings
(except calibration, which is described in section 3.1) and how
they will affect your measurements.
To Next Page
Loading...
