BRUEL & KJAER 2237 - The Measurement Window

BB106411.book : 2237-ch7 Black 2
Chapter 7 – Quick Reference
The Measurement Window
7–2
Brüel & Kjær2237 Controller
User Manual
7.1 The Measurement Window
During normal operation, you will use the Measurement Win-
dow to view your measured data. It provides several kinds
of information about your settings and measurements. See
section 2.3 for a more detailed description.
1. The bottom end of the measurement range (indB)
2. Quasi-analogue display
3. The upper end of the measurement range (indB) and
overload indicator (when showing “OVL” or blinking, see
section 3.2.3 for more information about overloads)
4. Battery level (see section 2.1.1)
5. Run/Stop indicator
6. Elapsed time
7. Peak parameter
8. Value of the peak parameter
9. RMS parameter weightings and type (see section 7.3)
10. Value of the RMS parameter
Fig.7.1 The Measurement Window
RUN 00:05:41
MaxP 94.7 dB
AF Leq 45.8 dB
30 100
7
5
8
6
9 10 11
1
3 42