Chapter 2 – Getting Started
Choosing the Language
BB 1219 – 11
15
Integrating Sound Level Meter Type 2239 A
User Manual
2.4 Choosing the Language
Type 2239 A is fluent in five languages. Use the procedure
below to choose the language used in the instrument’s display
screen.
1. If the sound level meter is on, then stop any measurement
and press to switch it off.
2. While the instrument is off, press and hold it down.
3. While holding , press .
4. Release both buttons. The instrument does a self-test and
then displays the Set-up Language window.
5. Press the and/or keys until your preferred lan-
guage appears in the window. The choices are (in order):
● English
● Francais
● Deutsch
● Italiano
● Espanol
6. Press or to choose the language and proceed to
the Measurement Window.
Fig.2.5 The Set-up Language Window
SET-UP
Language
>English
bb221911.book Page 15 Tuesday, July 24, 2001 11:23 AM
To Next Page
Loading...
