Chapter 4 – Data Operations
Working with Records
38
Brüel & KjærIntegrating Sound Level Meter Type 2239 A
User Manual
●
MinL
● Time and frequency weightings
● Time and date or measurement
● Measurement duration
● Overload Status
Once all 40 records have been filled, no further records can
be stored until some or all of the stored records are erased.
You are able to erase the last record taken or all records at
once (see section 4.1.4).
To save a record manually:
1. Take a manually timed measurement as described in sec-
tion 3.2.1.
2. Press until the Store Results Window appears on the
screen, as shown below.
3. Press to store the results in the displayed record
number (in the example shown in the figure above, results
will be stored in record number 4). You will then return
to the Measurement Window. If you wish to cancel the
operation rather than store the record, press to return
to the Measurement Window.
Fig.4.1 The Store Results Window
STORE
Current
Measurement
in Record No. 4
bb221911.book Page 38 Tuesday, July 24, 2001 11:23 AM
To Next Page
Loading...
