BRUEL & KJAER 2239 A - Transferring Results with Third Party Software

Chapter 4 – Data Operations
Transferring Records to a Computer
48
Brüel & KjærIntegrating Sound Level Meter Type 2239 A
User Manual
4.3.2 Transferring Results with Third Party Software
In some situations (e.g., if you are using a Macintosh™ or DOS-
only machine), you may want to use communications software
other than that included with your instrument. If so, follow
the instructions below.
1. Connect Type 2239 A to your computer as described in
section 4.3.1.
2. Start your communications software.
3. Set your software’s communication parameters as follows:
● 9600 Baud
● 8 data bits
● 1 stop bit
● Parity: none
● Handshake: XON/XOFF
4. Your communications software will probably ask you for
a name and location to which to save the data. Make the
appropriate selections. All records will be saved in a single
spreadsheet format file (tab separated) with the name and
location you choose.
Fig.4.15 Location of the serial port
960159e
Serial Interface
Serial Port
bb221911.book Page 48 Tuesday, July 24, 2001 11:23 AM