Chapter 7 – Quick Reference
Data Functions Flowchart
74
Brüel & KjærIntegrating Sound Level Meter Type 2239 A
User Manual
7.5 Data Functions Flowchart
The button gives you access to the sound level meter’s
data functions. These are used to store, print, download, and/
or erase records of sound measurements.You are only able to
do this while the instrument is not measuring. Press to
step through the available settings, as detailed in the flowchart
below. See section 3.4.4, section 4.2 and section 4.3 for more
information.
Note:
The flowchart shown in Fig. 7.7 and Fig. 7.8 shows all possible
choices. The following exceptions apply:
● If the buffer is empty (elapsed measurement time = 0),
then the Store Results window will not appear.
● If there are no stored records, then none of the recall,
output, or erase windows will appear.
● If there are no stored records and the buffer is empty, then
the following warning message will appear when you press
.
Fig.7.6 The no data available warning
*** WARNING ****
No Data
Available
bb221911.book Page 74 Tuesday, July 24, 2001 11:23 AM
To Next Page
Loading...
