Sound Level Meter Types 2245 –
Instruction Manual
Page 11 of 110
Use Measurement settings > Measurement control to setup how to control your
measurement:
Logging mode: Select
Enabled
to log
measurement data at every Logging interval.
Measurement time: Select
Preset
for the
measurement to run for Preset time – or
Free
to run until you stop it.
Back-erase mode: Select
Enabled
to back-
erase all data for the last Back-erase time,
when continuing a paused measurement. Only
available for Logging mode is
Disabled
Use Measurement settings > Broadband parameters to select the frequency
weightings to use and the broadband parameters to measure:
The use of keyboard in this display.
See details on measured broadband parameters in sections 2.13 Frequency Weightings
and 2.14 Measured Quantities.
To Next Page
Loading...
