Chapter 2– Getting Started
Optimizing the Screen
22
Brüel & KjærModular Precision Sound Analyzer Type 2260
User Manual
2.5.2 Changing the Viewing Conditions
1. With the Set-up menu on the display, press the <Display
Adjust
> soft key.
The Display Adjust menu appears (see Fig.2.5).
2. Press the
< > and < > soft keys to set the viewing
conditions to the required level (1 to 32).
3. Press the
<Save> soft key to save the viewing conditions
set-up.
or
Press the
<Undo> soft key to cancel any changes to the
viewing conditions set-up and return to the previously
saved viewing conditions set-up.
4. Press the
<Set-up Menu> soft key to return to the Set-
up Menu.
Note: If the temperature inside the analyzer changes signifi-
cantly (for example, when measuring in strong light after meas-
Fig.2.5 The Display Adjust menu
bb095513.book Page 22 Tuesday, April 9, 2002 1:42 PM
To Next Page
Loading...
