Chapter 3– Setting Up the Analyzer
Installing and Changing Applications
BB0955-13
33
Modular Precision Sound Analyzer Type 2260
User Manual
3. Press the <Change Application> soft key to get a list
of the installed software applications (see Fig.3.4).
4. Select the application software you want to use.
5. Press the <OK> soft key to change to this application soft-
ware.
Alternatively, press the <Cancel> soft key to retain the
current application software and return to the Applica-
tions menu.
3.2.5 How to Uninstall Applications
You may want to uninstall an application for freeing some
space on the internal disk (approximately 1.5 Mbyte per ap-
plication).
To uninstall an application you follow the same procedure as
you would for installing a new application, this is described
in section 3.2.3. The "2260 Firmware Installation Program" will
inform you which applications can be updated, which can be
upgraded and which can be installed for the first time. As well
Fig.3.4 The Change Application menu
bb095513.book Page 33 Tuesday, April 9, 2002 1:42 PM
To Next Page
Loading...
