Chapter 3– Setting Up the Analyzer
Using Timers
BB0955-13
35
Modular Precision Sound Analyzer Type 2260
User Manual
4. Synchronize with an external reference clock for accurate
readings and press the <Save> soft key to save this date
and time.
Alternatively, if you don’t want to save this date and time,
press the <Undo> soft key to return to the original date
and time.
5. Press the <System Menu> soft key to return to the System
menu.
3.4 Using Timers
3.4.1 Introduction
Modular Precision Analyzer Type2260 has built-in timers, con-
trolled by its clock (see section 3.3), which can be used to
start measurement sequences automatically at user-defined
times. Basically, a timer will:
● Switch on the analyzer at a preset time and date
Fig.3.5 The Clock menu
bb095513.book Page 35 Tuesday, April 9, 2002 1:42 PM
To Next Page
Loading...
