BRUEL & KJAER 2525 - Page 30

Measuring Ampifier Type 2525
User Manual Vol.2
Brüel & Kjær
4–10
Chapter 4 – Syntax and Data Types
Information Protocol
SHORT If you specify SHORT as the header, character data from the am-
plifier will be sent as mnemonics. That is, the letters shown in
bold only for each command.
LONG If you specify a LONG header, the amplifier will return the entire
name for each command header and character data.
Example of a response with a LONG header to the query:
Channel_1:Alarm_On_OFf?
:Channel_1:Alarm_On_Off OFf
Example of the response with a SHORT header to query:
Channel_1:Alarm_On_OFf?
:C_1:A_O_OF OF
Example of the response with an OFF header to the query:
Channel_1:Alarm_On_OFf?
OF
You can query the amplifier regarding the header setting as shown in Fig.4.10.
The default setting is Long
Fig.4.9 Syntax for Header command
Fig.4.10 Syntax for Header? query and amplifier response
941161e
Te
HEADER
SHORT
To 2525
SP
—
:
OFF
LONG
941272e
Te
HEADER?
To 2525
Header OFf
Te
From 2525
:
Header
Char
SP
—
:
HEADER