BRUEL & KJAER 2525 - Measurement Set-up Commands

Measuring Ampifier Type 2525
User Manual Vol.2
Brüel & Kjær
6–4
Chapter 6 – Set-up and Display (Results) Messages
Measurement Set-up Commands
6.3 Measurement Set-up Commands
6.3.1 Measurement_Mode
The syntax for this command appears as shown in Fig.6.2.
The default setting is Acceleration.
The syntax for the query Measurement_Mode? and the response returned by the
amplifier appears in Fig.6.3.
Fig.6.2 The syntax for the command Measurement_Mode
Fig.6.3 The syntax for the query Measurement_Mode? and amplifier response
9411126e
CHANNEL_1 MEASUREMENT_MODE
To 2525
: SP
—
:
DISPLACEMENT
VELOCITY
Te
ACCELERATION
FORCE
941127e
Te
CHANNEL_1
CHANNEL_1
MEASUREMENT_MODE?
To 2525
:
Header OFf
Te
From 2525
: :
Value
Char
SP
—
:
MEASUREMENT_MODE