Measuring Ampifier Type 2525
User Manual Vol.2
6–13
BE1394– 11
Chapter 6 – Set-up and Display (Results) Messages
Measurement Set-up Commands
6.3.8 Rms_Averaging_Time
The syntax for this command is shown in Fig.6.20.
The values for Mode and Time depend on whether Linear or Exponential have been
selected.
Value (Linear): 1 s, 60 s
Value(Exponential): 0.125 s, 1.0 s, 10.0 s
Resolution: As shown
Default: Exp, 1 s
Round: Nearest
The syntax diagram for the query Rms_Averaging_Time? and the amplifier’s re-
sponse is shown in Fig.6.21.
Fig.6.20 The syntax for the command Rms_Averaging_Time
Fig.6.21 The syntax for the query Rms_Averaging_Time and amplifier response
941144e
Te
CHANNEL_1 RMS_AVERAGING_TIME
To 2525
:
SP
—
:
Mode and Time
Mode and Time :
LINEAR
,
Value
NR
S
see below
EXPONENTIAL
941145e
Te
CHANNEL_1
CHANNEL_1
RMS_AVERAGING_TIME?
To 2525
:
Header OFf
Te
From 2525
: :
Avg Mode
Char
SP
—
:
RMS_AVERAGING_TIME
,
Avg Time
NR
To Next Page
Loading...
