BRUEL & KJAER 2706 - Specifications

Power Output Capacity:
Gain
at 1 kHz:
Input Impedance:
Output Impedance:
Harmonic Distortion:
Noise and Hum:
Max.
Output Current:
Max.
Output Voltage:
Protection:
DC
Stability:
Temperature Range:
Power Requirements:
6. SPECIFICATIONS
75 VA into a 3 n resistive load
40
dB± 1 dB
15
kn
0.04 n 10Hz to 5kHz
0.08 n 5kHz to 20kHz
<0.2% 20Hz to 10kHz
<0.5% 20Hz to 20kHz
At least 70 dB below fu II output
5.0 A RMS or 1.8 A RMS according to
selected value
15
V RMS
Short circuit of input or output
Heat sink temperature
Front panel indicator lights for output
signal clipping
Less than 25 mV drift for ± 10% variation
of mains supply from nominal, and for 10
to 40°C (50 to 104°F) variation in
ambient temperature
110, 115, 127, 150, 220, and 240 V AC,
50
to 60Hz
Approximately 140 W
Operates
within stated tolerances for a
voltage deviation
of up to± 5%
19