CHAPTER 1
Operation
15
Fig.1.6
Bolts to be removed to split
the head (remove from
both sides of the head)
1.6.2 Fixing Holes of the Head and Torso Simulator
Threaded fixing holes are provided at various locations on the HATS. These allow attachment
of user-designed support structures for the devices under test if required. Fig.1.7 shows the
positions of the holes, which are all M3-threaded. To help position devices under test, the
HATS has grids marked in centimetres both horizontally and vertically around both ears. Also,
the top of the head has a polar “grid” divided into 15
steps.
To Next Page
Loading...
