Chapter 1 — Introduction
The Microphones
Falcon™ Range of Microphone Products
Microphone Handbook
BE1372– 12
1
−
7
1.3.5 Microphone-data Disk
Introduction
A 3
1
/
2
" data disk which supplements the calibration chart is supplied with all mi-
crophones in the Falcon
Range except Prepolarized Free-field
1
/
2
" Microphone
Type 4188.
It contains calibration data in the \DATA directory and a presentation program,
Brüel&Kjær Microphone Viewer, in the root directory. The calibration data on each
disk is described in the relevant chapters of the handbook. The Brüel&Kjær Micro-
phone Viewer program must be installed on your computer’s hard disk before use
using the installation program SETUP.EXE supplied on the data disk (see below).
Computer Requirements
Brüel&Kjær Microphone Viewer requires:
●
Windows™ version 3.1 installed on your computer
●
3
1
/
2
" 1.4Mbyte disk drive
●
1.5Mbytes free disk space
●
VGA or SVGA display (minimum 640× 480 pixels)
Installing Brüel&Kjær Microphone Viewer
1. Insert the data disk in drive A.
2. Start Windows.
3. Click on the File menu in the Program Manager.
4. Select Run and type A:\SETUP.EXE.
5. Click on OK.
6. When SETUP.EXE asks you where you want to install the program, click on
OK.
Unless you have selected another directory, SETUP.EXE installs the program in
C:\BK–MIC. Two files (VBRUN300.DLL and VER.DLL) are installed in the
\WINDOWS\SYSTEM directory. These files are common for Visual Basic pro-
grams and can also be used by other programs.
About Brüel&Kjær Microphone Viewer
Brüel&Kjær Microphone Viewer shows the individual microphone’s data supplied
on the data disk in either graphical or tabular form.
To Next Page
Loading...
