CHAPTER 5
Specifications
31
Compliance with Standards
China RoHS mark indicates compliance with administrative measures on the control of
pollution caused by electronic information products according to the Ministry of Information
Industries of the People’s Republic of China
WEEE mark indicates compliance with the EU WEEE Directive
Safety EN/IEC 61010–1: Safety requirements for electrical equipment for measurement, control and
laboratory use
EMC Emission EN 50081-1: Generic emission standard. Part 1: Residential, commercial and light industry
EN 50081-2: Generic emission standard. Part 2: Industrial environment
CISPR 22: Radio disturbance characteristics of information technology equipment. Class B
Limits
FCC Rules, Part 15: Complies with the limits for a Class B digital device
EMC Immunity EN 50082-1: Generic immunity standard. Part 1: Residential, commercial and light industry
EN 50082-2: Generic immunity standard. Part 2: Industrial environment
NOTE: The specified calibration levels will not deviate more than 0.5dB when exposed to RF
specified in EN 50082-2 (10 V/m field).
Temperature IEC 60068-2-1 & IEC 60068-2-2: Environmental Testing. Cold and Dry Heat.
Operating Temperature: –10 to +55 °C (+14 to 131 °F)
Storage Temperature: –25 to +70 °C (–13 to +158 °F
Humidity IEC 60068-2-3: Damp Heat: 90% RH (non-condensing at 30 °C (86 °F))
Mechanical Non-operating:
IEC 60068–2–6: Vibration: 0.3 mm, 20 m/s
2
, 10 – 500 Hz
IEC 60068–2–27: Shock: 1000 m/s
2
IEC 60068–2–29: Bump: 3000 bumps at 250 m/s
2
Enclosure IEC 60529: Protection provided by enclosures: IP 20
To Next Page
Loading...
