4 of 18
Section 1
General Description and Operation
1.1 Purpose
The accelerometer 4511-W-006 is intended to measure the vibration of the mechanical gearbox for HUMS purposes. It consists of a
piezoelectric element and an electronic charge converter enclosed in a hermetic housing. The output provides a voltage signal
proportional to the acceleration. It is powered by a constant current line drive supply on the same wire as the output signal.
Fig. 1 Accelerometer monoaxial 4511-W-006
Fig. 2 Dimensions : All dimensions in millimeters
The document reference is online, please check the correspondence between the online documentation and the printed version.
To Next Page
Loading...
